cant compile libgig
cant compile libgig
Hello !
I am trying to compile libgig on a Debian 7 64 bit-system. The compilation fails with
an error message meaning that a 'configure'-file cannot be found :
a@a:~$ cd /home/a/Arbeitsfläche/ls/libgig
a@a:~/Arbeitsfläche/ls/libgig$ dpkg-buildpackage -rfakeroot -b
dpkg-buildpackage: Quellpaket libgig
dpkg-buildpackage: Quellversion 3.3.0-6
dpkg-buildpackage: Quellen geändert durch Christian Schoenebeck <cuse@users.sourceforge.net>
dpkg-buildpackage: Host-Architektur amd64
dpkg-source --before-build libgig
fakeroot debian/rules clean
dh_testdir
dh_testroot
rm -f build-stamp
/usr/bin/make -f Makefile.cvs || true
make[1]: Entering directory `/home/a/Arbeitsfläche/ls/libgig'
Can't locate Automake/Config.pm in @INC (@INC contains: /usr/share/automake-1.11 /etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl .) at /usr/bin/aclocal line 37.
BEGIN failed--compilation aborted at /usr/bin/aclocal line 37.
make[1]: *** [configure] Fehler 2
make[1]: Leaving directory `/home/a/Arbeitsfläche/ls/libgig'
chmod a+x configure
chmod: Zugriff auf „configure“ nicht möglich: Datei oder Verzeichnis nicht gefunden
make: *** [clean] Fehler 1
dpkg-buildpackage: Fehler: Fehler-Exitstatus von fakeroot debian/rules clean war 2
a@a:~/Arbeitsfläche/ls/libgig$
I then created a file named 'configure' by hand but the compilation still fails, now with the following message :
a@a:~$ cd /home/a/Arbeitsfläche/ls/libgig
a@a:~/Arbeitsfläche/ls/libgig$ dpkg-buildpackage -rfakeroot -b
dpkg-buildpackage: Quellpaket libgig
dpkg-buildpackage: Quellversion 3.3.0-6
dpkg-buildpackage: Quellen geändert durch Christian Schoenebeck <cuse@users.sourceforge.net>
dpkg-buildpackage: Host-Architektur amd64
dpkg-source --before-build libgig
fakeroot debian/rules clean
dh_testdir
dh_testroot
rm -f build-stamp
/usr/bin/make -f Makefile.cvs || true
make[1]: Entering directory `/home/a/Arbeitsfläche/ls/libgig'
Can't locate Automake/Config.pm in @INC (@INC contains: /usr/share/automake-1.11 /etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl .) at /usr/bin/aclocal line 37.
BEGIN failed--compilation aborted at /usr/bin/aclocal line 37.
make[1]: *** [configure] Fehler 2
make[1]: Leaving directory `/home/a/Arbeitsfläche/ls/libgig'
chmod a+x configure
chmod: Zugriff auf „configure“ nicht möglich: Datei oder Verzeichnis nicht gefunden
make: *** [clean] Fehler 1
dpkg-buildpackage: Fehler: Fehler-Exitstatus von fakeroot debian/rules clean war 2
a@a:~/Arbeitsfläche/ls/libgig$
I tried with automake 1, 1.4 and 1.9, results were all the same.
Many thanks in advance for any help !
I am trying to compile libgig on a Debian 7 64 bit-system. The compilation fails with
an error message meaning that a 'configure'-file cannot be found :
a@a:~$ cd /home/a/Arbeitsfläche/ls/libgig
a@a:~/Arbeitsfläche/ls/libgig$ dpkg-buildpackage -rfakeroot -b
dpkg-buildpackage: Quellpaket libgig
dpkg-buildpackage: Quellversion 3.3.0-6
dpkg-buildpackage: Quellen geändert durch Christian Schoenebeck <cuse@users.sourceforge.net>
dpkg-buildpackage: Host-Architektur amd64
dpkg-source --before-build libgig
fakeroot debian/rules clean
dh_testdir
dh_testroot
rm -f build-stamp
/usr/bin/make -f Makefile.cvs || true
make[1]: Entering directory `/home/a/Arbeitsfläche/ls/libgig'
Can't locate Automake/Config.pm in @INC (@INC contains: /usr/share/automake-1.11 /etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl .) at /usr/bin/aclocal line 37.
BEGIN failed--compilation aborted at /usr/bin/aclocal line 37.
make[1]: *** [configure] Fehler 2
make[1]: Leaving directory `/home/a/Arbeitsfläche/ls/libgig'
chmod a+x configure
chmod: Zugriff auf „configure“ nicht möglich: Datei oder Verzeichnis nicht gefunden
make: *** [clean] Fehler 1
dpkg-buildpackage: Fehler: Fehler-Exitstatus von fakeroot debian/rules clean war 2
a@a:~/Arbeitsfläche/ls/libgig$
I then created a file named 'configure' by hand but the compilation still fails, now with the following message :
a@a:~$ cd /home/a/Arbeitsfläche/ls/libgig
a@a:~/Arbeitsfläche/ls/libgig$ dpkg-buildpackage -rfakeroot -b
dpkg-buildpackage: Quellpaket libgig
dpkg-buildpackage: Quellversion 3.3.0-6
dpkg-buildpackage: Quellen geändert durch Christian Schoenebeck <cuse@users.sourceforge.net>
dpkg-buildpackage: Host-Architektur amd64
dpkg-source --before-build libgig
fakeroot debian/rules clean
dh_testdir
dh_testroot
rm -f build-stamp
/usr/bin/make -f Makefile.cvs || true
make[1]: Entering directory `/home/a/Arbeitsfläche/ls/libgig'
Can't locate Automake/Config.pm in @INC (@INC contains: /usr/share/automake-1.11 /etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl .) at /usr/bin/aclocal line 37.
BEGIN failed--compilation aborted at /usr/bin/aclocal line 37.
make[1]: *** [configure] Fehler 2
make[1]: Leaving directory `/home/a/Arbeitsfläche/ls/libgig'
chmod a+x configure
chmod: Zugriff auf „configure“ nicht möglich: Datei oder Verzeichnis nicht gefunden
make: *** [clean] Fehler 1
dpkg-buildpackage: Fehler: Fehler-Exitstatus von fakeroot debian/rules clean war 2
a@a:~/Arbeitsfläche/ls/libgig$
I tried with automake 1, 1.4 and 1.9, results were all the same.
Many thanks in advance for any help !
-
- User
- Posts: 61
- Joined: Fri Jan 03, 2014 5:59 pm
Re: cant compile libgig
Hi,
Try automake1.1.
Kind regards,
Janflorijn
Try automake1.1.
Kind regards,
Janflorijn
-
- User
- Posts: 61
- Joined: Fri Jan 03, 2014 5:59 pm
Re: cant compile libgig
A complete list of required packages:
sudo apt-get install g++ debhelper pkg-config automake1.1 automake1.4 automake1.9 libtool fakeroot libsndfile1-dev doxygen uuid-dev bison
sudo apt-get install intltool libgtkmm-2.4-dev xsltproc flex sqlite 3.3
sudo apt-get install ant qt4-dev-tools libjack-jackd2-dev
sudo apt-get install g++ debhelper pkg-config automake1.1 automake1.4 automake1.9 libtool fakeroot libsndfile1-dev doxygen uuid-dev bison
sudo apt-get install intltool libgtkmm-2.4-dev xsltproc flex sqlite 3.3
sudo apt-get install ant qt4-dev-tools libjack-jackd2-dev
Re: cant compile libgig
Thank you very much. I installed everything as you suggested, now the error message reads as follows (I only copied the last 10 lines ) :
# Add here commands to compile the package.
/usr/bin/make
make[1]: Entering directory `/home/a/Arbeitsfläche/ls/libgig'
make[1]: *** Keine Targets angegeben und keine »make«-Steuerdatei gefunden. Schluss.
make[1]: Leaving directory `/home/a/Arbeitsfläche/ls/libgig'
make: *** [build-stamp] Fehler 2
dpkg-buildpackage: Fehler: Fehler-Exitstatus von debian/rules build war 2
a@a:~/Arbeitsfläche/ls/libgig$
meaning that no targets were found and no make-file either. I then uninstalled automake 1.4 and 1.9 and
tried with automake 1.1. alone, but the result was the same. I have Flex installed. Do you have any ideas ?
Many thanks in advance !
# Add here commands to compile the package.
/usr/bin/make
make[1]: Entering directory `/home/a/Arbeitsfläche/ls/libgig'
make[1]: *** Keine Targets angegeben und keine »make«-Steuerdatei gefunden. Schluss.
make[1]: Leaving directory `/home/a/Arbeitsfläche/ls/libgig'
make: *** [build-stamp] Fehler 2
dpkg-buildpackage: Fehler: Fehler-Exitstatus von debian/rules build war 2
a@a:~/Arbeitsfläche/ls/libgig$
meaning that no targets were found and no make-file either. I then uninstalled automake 1.4 and 1.9 and
tried with automake 1.1. alone, but the result was the same. I have Flex installed. Do you have any ideas ?
Many thanks in advance !
-
- User
- Posts: 61
- Joined: Fri Jan 03, 2014 5:59 pm
Re: cant compile libgig
Hi,
1. Once compiling did not work and I had installed everything I could find wich maybe could help, so very very much. This was to juch. I made a new isntall and updated linux and compiling works very well.
2. here a complete list, based on info from David Bolton:
Please execute in this order.
Please change to your architecture 32 bit/64bit and processor
You can also try without changing debian/rules, so you know if the edit of debian rules causes the problems
sudo apt-get install subversion
cd ls
svn co https://svn.linuxsampler.org/svn/libgig/trunk libgig
svn co https://svn.linuxsampler.org/svn/liblscp/trunk liblscp
svn co https://svn.linuxsampler.org/svn/linuxsampler/trunk linuxsampler
svn co https://svn.linuxsampler.org/svn/qsampler/trunk qsampler
svn co https://svn.linuxsampler.org/svn/jlscp/trunk jlscp
svn co https://svn.linuxsampler.org/svn/jsampler/trunk jsampler
svn co https://svn.linuxsampler.org/svn/gigedit/trunk gigedit
sudo apt-get install g++ debhelper pkg-config automake1.1 automake1.4 automake1.9 libtool fakeroot libsndfile1-dev doxygen uuid-dev bison(Please check if everything is installed. Execute one line a time)
sudo apt-get install intltool libgtkmm-2.4-dev xsltproc flex sqlite 3.3 (Please check if everything is installed. Execute one line a time)
sudo apt-get install ant qt4-dev-tools libjack-jackd2-dev(Please check if everything is installed. Execute one line a time)
----------------------------------
Edit text file debian/rules:(sometimes on two places!)
chmod a+x configure
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="-march=athlon-fx -mtune=athlon-fx"
./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
------------------------------------------------------
cd liblscp
dpkg-buildpackage -rfakeroot -b
cd ..
sudo dpkg -i liblscp6_0.5.7-1_i386.deb
sudo dpkg -i liblscp-dev_0.5.7-1_i386.deb
cd libgig
dpkg-buildpackage -rfakeroot -b
cd ..
dpkg-buildpackage -rfakeroot -b
sudo dpkg -i libgig6_3.3.0-6_i386.deb
sudo dpkg -i libgig-dev_3.3.0-6_i386.deb
sudo dpkg -i gigtools_3.3.0-6_i386.deb
----------------------------------
Edit text file debian/rules:(sometimes on two places!)
chmod a+x configure
CHOST="x86_64-pc-linux-gnu" CXXFLAGS="-march=athlon-fx -mtune=athlon-fx"
./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
------------------------------------------------------
cd linuxsampler
sudo dpkg-buildpackage -rfakeroot -b
cd ..
sudo dpkg -i linuxsampler_1.0.0-1_i386.deb
sudo dpkg -i liblinuxsampler-dev_1.0.0-1_i386.deb
sudo dpkg -i liblinuxsampler_1.0.0-1_i386.deb
CHOST="x86_64-pc-linux-gnu"
cd gigedit
sudo dpkg-buildpackage -rfakeroot -b
cd ..
sudo dpkg -i gigedit_0.2.0-1_i386.deb
3.
Instead of dpkg-buildpackage -rfakeroot -b you can try:
make -f makefile.cvs (sometimes svn)
./configure
make
sudo make install
and see wath happens.
Kind regards,
JanFlorijn
1. Once compiling did not work and I had installed everything I could find wich maybe could help, so very very much. This was to juch. I made a new isntall and updated linux and compiling works very well.
2. here a complete list, based on info from David Bolton:
Please execute in this order.
Please change to your architecture 32 bit/64bit and processor
You can also try without changing debian/rules, so you know if the edit of debian rules causes the problems
sudo apt-get install subversion
cd ls
svn co https://svn.linuxsampler.org/svn/libgig/trunk libgig
svn co https://svn.linuxsampler.org/svn/liblscp/trunk liblscp
svn co https://svn.linuxsampler.org/svn/linuxsampler/trunk linuxsampler
svn co https://svn.linuxsampler.org/svn/qsampler/trunk qsampler
svn co https://svn.linuxsampler.org/svn/jlscp/trunk jlscp
svn co https://svn.linuxsampler.org/svn/jsampler/trunk jsampler
svn co https://svn.linuxsampler.org/svn/gigedit/trunk gigedit
sudo apt-get install g++ debhelper pkg-config automake1.1 automake1.4 automake1.9 libtool fakeroot libsndfile1-dev doxygen uuid-dev bison(Please check if everything is installed. Execute one line a time)
sudo apt-get install intltool libgtkmm-2.4-dev xsltproc flex sqlite 3.3 (Please check if everything is installed. Execute one line a time)
sudo apt-get install ant qt4-dev-tools libjack-jackd2-dev(Please check if everything is installed. Execute one line a time)
----------------------------------
Edit text file debian/rules:(sometimes on two places!)
chmod a+x configure
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="-march=athlon-fx -mtune=athlon-fx"
./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
------------------------------------------------------
cd liblscp
dpkg-buildpackage -rfakeroot -b
cd ..
sudo dpkg -i liblscp6_0.5.7-1_i386.deb
sudo dpkg -i liblscp-dev_0.5.7-1_i386.deb
cd libgig
dpkg-buildpackage -rfakeroot -b
cd ..
dpkg-buildpackage -rfakeroot -b
sudo dpkg -i libgig6_3.3.0-6_i386.deb
sudo dpkg -i libgig-dev_3.3.0-6_i386.deb
sudo dpkg -i gigtools_3.3.0-6_i386.deb
----------------------------------
Edit text file debian/rules:(sometimes on two places!)
chmod a+x configure
CHOST="x86_64-pc-linux-gnu" CXXFLAGS="-march=athlon-fx -mtune=athlon-fx"
./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
------------------------------------------------------
cd linuxsampler
sudo dpkg-buildpackage -rfakeroot -b
cd ..
sudo dpkg -i linuxsampler_1.0.0-1_i386.deb
sudo dpkg -i liblinuxsampler-dev_1.0.0-1_i386.deb
sudo dpkg -i liblinuxsampler_1.0.0-1_i386.deb
CHOST="x86_64-pc-linux-gnu"
cd gigedit
sudo dpkg-buildpackage -rfakeroot -b
cd ..
sudo dpkg -i gigedit_0.2.0-1_i386.deb
3.
Instead of dpkg-buildpackage -rfakeroot -b you can try:
make -f makefile.cvs (sometimes svn)
./configure
make
sudo make install
and see wath happens.
Kind regards,
JanFlorijn
-
- User
- Posts: 61
- Joined: Fri Jan 03, 2014 5:59 pm
Re: cant compile libgig
Hi,
An other option is to search in the screen output to the first occurence of a error message. Mostly that gives a idea of the real cause.
One error causes the other, so what is the first cause?
Kind regards,
JanFlorijn
An other option is to search in the screen output to the first occurence of a error message. Mostly that gives a idea of the real cause.
One error causes the other, so what is the first cause?
Kind regards,
JanFlorijn
-
- User
- Posts: 61
- Joined: Fri Jan 03, 2014 5:59 pm
Re: cant compile libgig
Hi,
An other option:
Did you edit arbeitsflache/ls/libgig/debian/rules?
Do you run 32bit/64bit and wich processor do you have?
Can you sent the file debian rules?
Kind regards
JanFlorijn
An other option:
Did you edit arbeitsflache/ls/libgig/debian/rules?
Do you run 32bit/64bit and wich processor do you have?
Can you sent the file debian rules?
Kind regards
JanFlorijn
-
- User
- Posts: 61
- Joined: Fri Jan 03, 2014 5:59 pm
Re: cant compile libgig
Hi, I should not create a configure file by hand.
Wich linux distro you use?
I work with Ubuntu Studo 14.
Please have a look at the original debian/rules and the edited:
https://drive.google.com/file/d/0B8X24I ... sp=sharing
https://drive.google.com/file/d/0B8X24I ... sp=sharing
Kind regards,
JanFlorijn
Wich linux distro you use?
I work with Ubuntu Studo 14.
Please have a look at the original debian/rules and the edited:
https://drive.google.com/file/d/0B8X24I ... sp=sharing
https://drive.google.com/file/d/0B8X24I ... sp=sharing
Kind regards,
JanFlorijn
-
- User
- Posts: 61
- Joined: Fri Jan 03, 2014 5:59 pm
Re: cant compile libgig
Hi,
I did a clean install ubuntu studio 14
I compiled without changing the deian/rules, I changed nothing
All the 64 bit deb files are available for download here:
https://drive.google.com/folderview?id= ... sp=sharing
The command are without changes:
---------------------
sudo apt-get install subversion
mkdir lssvn
cd lssvn
svn co https://svn.linuxsampler.org/svn/libgig/trunk libgig
svn co https://svn.linuxsampler.org/svn/liblscp/trunk liblscp
svn co https://svn.linuxsampler.org/svn/linuxsampler/trunk linuxsampler
svn co https://svn.linuxsampler.org/svn/qsampler/trunk qsampler
svn co https://svn.linuxsampler.org/svn/jlscp/trunk jlscp
svn co https://svn.linuxsampler.org/svn/jsampler/trunk jsampler
svn co https://svn.linuxsampler.org/svn/gigedit/trunk gigedit
sudo apt-get install g++ debhelper pkg-config automake1.1 automake1.4 automake1.9 libtool fakeroot libsndfile1-dev doxygen uuid-dev bison
sudo apt-get install intltool libgtkmm-2.4-dev xsltproc flex sqlite 3.3
sudo apt-get install ant qt4-dev-tools libjack-jackd2-dev
cd liblscp
dpkg-buildpackage -rfakeroot -b
cd ..
sudo dpkg -i liblscp6_0.5.7-1_amd64.deb
sudo dpkg -i liblscp-dev_0.5.7-1_amd64.deb
cd libgig
dpkg-buildpackage -rfakeroot -b
cd ..
dpkg-buildpackage -rfakeroot -b
sudo dpkg -i libgig6_3.3.0-6_amd64.deb
sudo dpkg -i libgig-dev_3.3.0-6_amd64.deb
sudo dpkg -i gigtools_3.3.0-6_amd64.deb
cd linuxsampler
sudo dpkg-buildpackage
cd ..
sudo dpkg -i linuxsampler_1.0.0-1_amd64.deb
sudo dpkg -i liblinuxsampler-dev_1.0.0-1_amd64.deb
sudo dpkg -i liblinuxsampler_1.0.0-1_amd64.deb
cd gigedit
sudo dpkg-buildpackage
cd ..
sudo dpkg -i gigedit_0.2.0-1_amd64.deb
------------------------------------
Kind regards,
JanFlorijn
I did a clean install ubuntu studio 14
I compiled without changing the deian/rules, I changed nothing
All the 64 bit deb files are available for download here:
https://drive.google.com/folderview?id= ... sp=sharing
The command are without changes:
---------------------
sudo apt-get install subversion
mkdir lssvn
cd lssvn
svn co https://svn.linuxsampler.org/svn/libgig/trunk libgig
svn co https://svn.linuxsampler.org/svn/liblscp/trunk liblscp
svn co https://svn.linuxsampler.org/svn/linuxsampler/trunk linuxsampler
svn co https://svn.linuxsampler.org/svn/qsampler/trunk qsampler
svn co https://svn.linuxsampler.org/svn/jlscp/trunk jlscp
svn co https://svn.linuxsampler.org/svn/jsampler/trunk jsampler
svn co https://svn.linuxsampler.org/svn/gigedit/trunk gigedit
sudo apt-get install g++ debhelper pkg-config automake1.1 automake1.4 automake1.9 libtool fakeroot libsndfile1-dev doxygen uuid-dev bison
sudo apt-get install intltool libgtkmm-2.4-dev xsltproc flex sqlite 3.3
sudo apt-get install ant qt4-dev-tools libjack-jackd2-dev
cd liblscp
dpkg-buildpackage -rfakeroot -b
cd ..
sudo dpkg -i liblscp6_0.5.7-1_amd64.deb
sudo dpkg -i liblscp-dev_0.5.7-1_amd64.deb
cd libgig
dpkg-buildpackage -rfakeroot -b
cd ..
dpkg-buildpackage -rfakeroot -b
sudo dpkg -i libgig6_3.3.0-6_amd64.deb
sudo dpkg -i libgig-dev_3.3.0-6_amd64.deb
sudo dpkg -i gigtools_3.3.0-6_amd64.deb
cd linuxsampler
sudo dpkg-buildpackage
cd ..
sudo dpkg -i linuxsampler_1.0.0-1_amd64.deb
sudo dpkg -i liblinuxsampler-dev_1.0.0-1_amd64.deb
sudo dpkg -i liblinuxsampler_1.0.0-1_amd64.deb
cd gigedit
sudo dpkg-buildpackage
cd ..
sudo dpkg -i gigedit_0.2.0-1_amd64.deb
------------------------------------
Kind regards,
JanFlorijn
Re: cant compile libgig
Thank you very much !
With your recent suggestion: it fails again with a message saying
that a file named 'configure' cant be found :
make[1]: *** [configure] Fehler 255
make[1]: Leaving directory `/home/a/Arbeitsfläche/lssvn/liblscp'
chmod a+x ./configure
chmod: Zugriff auf „./configure“ nicht möglich: Datei oder Verzeichnis nicht gefunden
make: *** [clean] Fehler 1
dpkg-buildpackage: Fehler: Fehler-Exitstatus von fakeroot debian/rules clean war 2
a@a:~/Arbeitsfläche/lssvn/liblscp$
As you can see from the screenshot, no 'configure'-file has come over from svn : (I hope it worked out with posting the screenshot, if not : I swear there is no file named 'configure' around !)
With your recent suggestion: it fails again with a message saying
that a file named 'configure' cant be found :
make[1]: *** [configure] Fehler 255
make[1]: Leaving directory `/home/a/Arbeitsfläche/lssvn/liblscp'
chmod a+x ./configure
chmod: Zugriff auf „./configure“ nicht möglich: Datei oder Verzeichnis nicht gefunden
make: *** [clean] Fehler 1
dpkg-buildpackage: Fehler: Fehler-Exitstatus von fakeroot debian/rules clean war 2
a@a:~/Arbeitsfläche/lssvn/liblscp$
As you can see from the screenshot, no 'configure'-file has come over from svn : (I hope it worked out with posting the screenshot, if not : I swear there is no file named 'configure' around !)