audio devices handling
-
- Newbie
- Posts: 27
- Joined: Thu Jan 24, 2008 2:28 am
- Location: Lower Templestowe, Victoria. Australia
- Contact:
audio devices handling
area of much confusion for me for sometime. i have created a jack device with 32 channels but Fantasia has the 'outputs' registered in the 'inputs' dialogue ! and whne i have made my assignments and save the session, when next i open it i have to re-assign all the outputs again 'cause everything is back to a default of outputs 1&2. Qsampler isn't much better at this, tho i haven't had the return to default state as described. The model isn't very clear. Any help better describing the issues involved in device creation and management would be well appreciated (all built from cvs btw.)
best,
g.
best,
g.
- dahnielson
- Moderator
- Posts: 632
- Joined: Wed Jan 23, 2008 11:25 pm
- Location: Linköping / Tranås, Sweden
- Contact:
Re: audio devices handling
The current release of Fantasia doesn't serialize any audio devices when writing LSCP to disk. It's a bug and it's fixed in CVS.
Anders Dahnielson
Ardour2, Qtractor, Linuxsampler, M-AUDIO Delta 1010, Axiom 61, Korg D12, AKAI S2000, E-MU Proteus 2k, Roland R-5, Roland HP 1300e, Zoom RFX-1000, 4GB RAM x86_64 Intel Pentium Dual 1.80GHz Gentoo Linux
Ardour2, Qtractor, Linuxsampler, M-AUDIO Delta 1010, Axiom 61, Korg D12, AKAI S2000, E-MU Proteus 2k, Roland R-5, Roland HP 1300e, Zoom RFX-1000, 4GB RAM x86_64 Intel Pentium Dual 1.80GHz Gentoo Linux
- dahnielson
- Moderator
- Posts: 632
- Joined: Wed Jan 23, 2008 11:25 pm
- Location: Linköping / Tranås, Sweden
- Contact:
Re: audio devices handling
You're right. The channel routing in Fantasia isn't serialized either!
Anders Dahnielson
Ardour2, Qtractor, Linuxsampler, M-AUDIO Delta 1010, Axiom 61, Korg D12, AKAI S2000, E-MU Proteus 2k, Roland R-5, Roland HP 1300e, Zoom RFX-1000, 4GB RAM x86_64 Intel Pentium Dual 1.80GHz Gentoo Linux
Ardour2, Qtractor, Linuxsampler, M-AUDIO Delta 1010, Axiom 61, Korg D12, AKAI S2000, E-MU Proteus 2k, Roland R-5, Roland HP 1300e, Zoom RFX-1000, 4GB RAM x86_64 Intel Pentium Dual 1.80GHz Gentoo Linux
Re: audio devices handling
There is support for exporting the channel routing in Fantasia but the command order was incorrect. Fantasia was trying to set the channel routing before assigning the sampler engine. This bug is now fixed (hopefully) in the latest cvs version of JSampler.
- dahnielson
- Moderator
- Posts: 632
- Joined: Wed Jan 23, 2008 11:25 pm
- Location: Linköping / Tranås, Sweden
- Contact:
Re: audio devices handling
Hurray!
It works as advertised. Now I can get on and eq, pan and mix all instruments separatly...
It works as advertised. Now I can get on and eq, pan and mix all instruments separatly...
Anders Dahnielson
Ardour2, Qtractor, Linuxsampler, M-AUDIO Delta 1010, Axiom 61, Korg D12, AKAI S2000, E-MU Proteus 2k, Roland R-5, Roland HP 1300e, Zoom RFX-1000, 4GB RAM x86_64 Intel Pentium Dual 1.80GHz Gentoo Linux
Ardour2, Qtractor, Linuxsampler, M-AUDIO Delta 1010, Axiom 61, Korg D12, AKAI S2000, E-MU Proteus 2k, Roland R-5, Roland HP 1300e, Zoom RFX-1000, 4GB RAM x86_64 Intel Pentium Dual 1.80GHz Gentoo Linux
Re: audio devices handling
I admit this is misleading, though it isn't that incorrect. Audio Out shows the number of the engine's audio channel (which provides the audio sampled by the engine), which is inputed/routed to the specified audio channel of the selected audio output device.area of much confusion for me for sometime. i have created a jack device with 32 channels but Fantasia has the 'outputs' registered in the 'inputs' dialogue !
I would change those labels if someone propose more meaningful (and still short) labels instead.
-
- Newbie
- Posts: 27
- Joined: Thu Jan 24, 2008 2:28 am
- Location: Lower Templestowe, Victoria. Australia
- Contact:
Re: audio devices handling
how about 'source' instead of 'output' and 'output' or 'device' instead of input ?
i'll build cvs now and test. thanks
g.
i'll build cvs now and test. thanks
g.
-
- Newbie
- Posts: 27
- Joined: Thu Jan 24, 2008 2:28 am
- Location: Lower Templestowe, Victoria. Australia
- Contact:
Re: audio devices handling
it's working
thanks Grigor
g.
thanks Grigor
g.