Hello,
where can I find a completed list of all LSCP commands?
thx.
with best regards
Norbert
LSCP commands
-
- Newbie
- Posts: 10
- Joined: Wed May 12, 2010 7:46 am
Re: LSCP commands
Hello,
thanks.
Has you a tip where I can found a completed setting for windows?
I see allways Jack and Alsa, and not settings for windows.
with best regards
Norbert
thanks.
Has you a tip where I can found a completed setting for windows?
I see allways Jack and Alsa, and not settings for windows.
with best regards
Norbert
Re: LSCP commands
Norbert,
I'm not using Windows, but there is a jack version for windows, so maybe that will give you more options.
http://jackaudio.org/download
(Windows is jack2, down the page a little)
Good luck.
Alex.
I'm not using Windows, but there is a jack version for windows, so maybe that will give you more options.
http://jackaudio.org/download
(Windows is jack2, down the page a little)
Good luck.
Alex.
Re: LSCP commands
Hi Norbert,
Linuxsampler running in Windows uses the ASIO audio driver. While it may be possible to compile 'linuxsampler for windows' with 'jack for window's support, this has not been done (please developers, if this is possible could we make it so!). If you need more information about what the LSCP commands look like for the ASIO drivers let me know and I'll load up linuxsampler in Windows and do a couple of configurations to send to you.
GrahamG
Linuxsampler running in Windows uses the ASIO audio driver. While it may be possible to compile 'linuxsampler for windows' with 'jack for window's support, this has not been done (please developers, if this is possible could we make it so!). If you need more information about what the LSCP commands look like for the ASIO drivers let me know and I'll load up linuxsampler in Windows and do a couple of configurations to send to you.
GrahamG
-
- Newbie
- Posts: 10
- Joined: Wed May 12, 2010 7:46 am
Re: LSCP commands
Hello,
thank you very much for your proposition.
It will very helpfull for me.
At the moment I cannot use jack for windows. I build a program for any users. An additional setting for jack ist
at the moment not possible.
I have made a good configuration with LSCP commands.
But any details are very unclearly for me.
Audio output is ok. (I think so)
CREATE AUDIO_OUTPUT_DEVICE ASIO ACTIVE='true' CARD='ASIO4ALL v2' CHANNELS='8' FRAGMENTSIZE='512' SAMPLERATE='44100'
Can I made ONLY 1 audio outputport?
What means this commands?
SET AUDIO_OUTPUT_CHANNEL_PARAMETER 0 0 NAME='Channel 0'
SET AUDIO_OUTPUT_CHANNEL_PARAMETER 0 1 NAME='Channel 1'
SET AUDIO_OUTPUT_CHANNEL_PARAMETER 0 2 NAME='Channel 2'
SET AUDIO_OUTPUT_CHANNEL_PARAMETER 0 3 NAME='Channel 3'
Ok. Midi In is ok for 1 channel.
# MIDI MME Device 1
CREATE MIDI_INPUT_DEVICE MME ACTIVE='true' PORTS='1'
SET MIDI_INPUT_PORT_PARAMETER 1 0 NAME='Port 0'
SET MIDI_INPUT_PORT_PARAMETER 1 0 PORT='SB Audigy 2 ZS MIDI IO [E800]'
this works for 1 inputport. But I have 4 inputports. It is unclearly for me, what I must set.
ADD MIDI_INSTRUMENT_MAP 'Chromatic'
ADD MIDI_INSTRUMENT_MAP 'Drum Kits'
This is ok,
And now the big problem for me:
# Channel 0
ADD CHANNEL
SET CHANNEL AUDIO_OUTPUT_DEVICE 0 0
SET CHANNEL MIDI_INPUT_DEVICE 0 1
SET CHANNEL MIDI_INPUT_PORT 0 0
SET CHANNEL MIDI_INPUT_CHANNEL 0 0
LOAD ENGINE GIG 0
LOAD INSTRUMENT NON_MODAL 'h:/XGT2/Piano/GrandPiano.gig' 0 0
Ok, I can play a Piano.
But what must I do, when I will hear a Piano on Channel 0 and Strings on Channel 1 at the same time?
And what must I do, when I will hear a Piano on Channel 0 Midi In Port 0, Channel 0 and Strings on Midi InPort 1, Channel 0 at the same time?
And an other question:
How can I load a SF2 instrument?
Thanks
with best regards
Norbert
thank you very much for your proposition.
It will very helpfull for me.
At the moment I cannot use jack for windows. I build a program for any users. An additional setting for jack ist
at the moment not possible.
I have made a good configuration with LSCP commands.
But any details are very unclearly for me.
Audio output is ok. (I think so)
CREATE AUDIO_OUTPUT_DEVICE ASIO ACTIVE='true' CARD='ASIO4ALL v2' CHANNELS='8' FRAGMENTSIZE='512' SAMPLERATE='44100'
Can I made ONLY 1 audio outputport?
What means this commands?
SET AUDIO_OUTPUT_CHANNEL_PARAMETER 0 0 NAME='Channel 0'
SET AUDIO_OUTPUT_CHANNEL_PARAMETER 0 1 NAME='Channel 1'
SET AUDIO_OUTPUT_CHANNEL_PARAMETER 0 2 NAME='Channel 2'
SET AUDIO_OUTPUT_CHANNEL_PARAMETER 0 3 NAME='Channel 3'
Ok. Midi In is ok for 1 channel.
# MIDI MME Device 1
CREATE MIDI_INPUT_DEVICE MME ACTIVE='true' PORTS='1'
SET MIDI_INPUT_PORT_PARAMETER 1 0 NAME='Port 0'
SET MIDI_INPUT_PORT_PARAMETER 1 0 PORT='SB Audigy 2 ZS MIDI IO [E800]'
this works for 1 inputport. But I have 4 inputports. It is unclearly for me, what I must set.
ADD MIDI_INSTRUMENT_MAP 'Chromatic'
ADD MIDI_INSTRUMENT_MAP 'Drum Kits'
This is ok,
And now the big problem for me:
# Channel 0
ADD CHANNEL
SET CHANNEL AUDIO_OUTPUT_DEVICE 0 0
SET CHANNEL MIDI_INPUT_DEVICE 0 1
SET CHANNEL MIDI_INPUT_PORT 0 0
SET CHANNEL MIDI_INPUT_CHANNEL 0 0
LOAD ENGINE GIG 0
LOAD INSTRUMENT NON_MODAL 'h:/XGT2/Piano/GrandPiano.gig' 0 0
Ok, I can play a Piano.
But what must I do, when I will hear a Piano on Channel 0 and Strings on Channel 1 at the same time?
And what must I do, when I will hear a Piano on Channel 0 Midi In Port 0, Channel 0 and Strings on Midi InPort 1, Channel 0 at the same time?
And an other question:
How can I load a SF2 instrument?
Thanks
with best regards
Norbert