I tried to load some Garritan Personal Orchestra instruments into the sfz engine of LS.
It did not work - yet.
Will it be possible at some point to load these sample instruments?
LS performs a lot better than aria.
GPO and Linuxsampler
Re: GPO and Linuxsampler
Is LS giving some error on the console when you try to load the instruments?
-
- Advanced User
- Posts: 147
- Joined: Fri Sep 26, 2008 9:04 am
Re: GPO and Linuxsampler
Fantasia displays "instrument failed to load" ; nothing in th console.
Qsampler gives an Err-3 and outputs:
15:48:14.428 Client connecting...
15:48:14.460 Client receive timeout is set to 10000 msec.
15:48:14.467 Client connected.
15:48:14.494 Sent fine tuning settings.
15:48:14.588 New session: "Untitled1".
15:48:51.327 Channel 0 removed.
15:48:53.040 New Channel setup...
15:49:33.251 Channel 0 added.
15:49:33.253 Channel 0 Audio driver: COREAUDIO.
15:49:33.255 Channel 0 MIDI driver: COREMIDI.
15:49:33.255 Channel 0 MIDI port: 0.
15:49:33.258 Channel 0 MIDI channel: 0.
15:49:33.352 Channel 0 Engine: SFZ.
15:49:33.354 Channel 0 Instrument: "/Applications/Garritan Personal Orchestra 4/Instruments/8. Section Strings/1. Violins 1/Vlns 1 Lush.sfz" (0).
15:49:33.355 Channel 0 MIDI map: 0.
Qsampler gives an Err-3 and outputs:
15:48:14.428 Client connecting...
15:48:14.460 Client receive timeout is set to 10000 msec.
15:48:14.467 Client connected.
15:48:14.494 Sent fine tuning settings.
15:48:14.588 New session: "Untitled1".
15:48:51.327 Channel 0 removed.
15:48:53.040 New Channel setup...
15:49:33.251 Channel 0 added.
15:49:33.253 Channel 0 Audio driver: COREAUDIO.
15:49:33.255 Channel 0 MIDI driver: COREMIDI.
15:49:33.255 Channel 0 MIDI port: 0.
15:49:33.258 Channel 0 MIDI channel: 0.
15:49:33.352 Channel 0 Engine: SFZ.
15:49:33.354 Channel 0 Instrument: "/Applications/Garritan Personal Orchestra 4/Instruments/8. Section Strings/1. Violins 1/Vlns 1 Lush.sfz" (0).
15:49:33.355 Channel 0 MIDI map: 0.
Re: GPO and Linuxsampler
I think there should be some error message. If you are not running LS from terminal, but as a plugin, you can see the error messages in the Console logs - launch /Aplications/Utilities/Console. You may need to wait a bit before the error messages show up.
Re: GPO and Linuxsampler
Another way would be to try to load the instrument from the LS Console - first create a sampler channel and assign a SFZ engine and then:
If you have a LSCP scrip, for the error to show up on the LS Console you should remove the keyword NON_MODAL and one space.
Code: Select all
LOAD INSTRUMENT '/Applications/Garritan Personal Orchestra 4/Instruments/8. Section Strings/1. Violins 1/Vlns 1 Lush.sfz' 0 0
-
- Advanced User
- Posts: 147
- Joined: Fri Sep 26, 2008 9:04 am
Re: GPO and Linuxsampler
My fault... I didn't know they have a special audio format for the samples:
Example:
sample=Bsf9TMoG#1_0002102C.audio
I have no clue what this is.
Example:
sample=Bsf9TMoG#1_0002102C.audio
I have no clue what this is.