cant compile libgig
-
- User
- Posts: 61
- Joined: Fri Jan 03, 2014 5:59 pm
Re: cant compile libgig
Hi,
I did not see a attachment, but I believe you.
Can you
go in a terminal to lssvn\liblscp then type ls and select with the mouse the text on screen And copy this in a reply?
Did you run :
go to lssvn
remove map liblscp
Then:
svn co https://svn.linuxsampler.org/svn/liblscp/trunk liblscp
from the directory "lssvn"?
And then:
cd liblscp
dpkg-buildpackage -rfakeroot -b
cd ..
And you find a liblscp deb file?
Wich distribution of Linux do you use?
I understand you have a 64 bit OS
Kind regards,
JanFlorijn
I did not see a attachment, but I believe you.
Can you
go in a terminal to lssvn\liblscp then type ls and select with the mouse the text on screen And copy this in a reply?
Did you run :
go to lssvn
remove map liblscp
Then:
svn co https://svn.linuxsampler.org/svn/liblscp/trunk liblscp
from the directory "lssvn"?
And then:
cd liblscp
dpkg-buildpackage -rfakeroot -b
cd ..
And you find a liblscp deb file?
Wich distribution of Linux do you use?
I understand you have a 64 bit OS
Kind regards,
JanFlorijn
-
- User
- Posts: 61
- Joined: Fri Jan 03, 2014 5:59 pm
Re: cant compile libgig
My mpa liblscp contains:
AUTHORS debian liblscp.spec.in Makefile.svn src
ChangeLog doc lscp NEWS TODO
configure.ac examples lscp.pc.in osx win32
COPYING INSTALL Makefile.am README
Bet copied: Select listed output and right mouseclick copy
Paste in message
Kind regards,
JanFlorijn
AUTHORS debian liblscp.spec.in Makefile.svn src
ChangeLog doc lscp NEWS TODO
configure.ac examples lscp.pc.in osx win32
COPYING INSTALL Makefile.am README
Bet copied: Select listed output and right mouseclick copy
Paste in message
Kind regards,
JanFlorijn
Re: cant compile libgig
Dear Janflorjin,
I am still under fresh shock at discovering that you d i d reply
to what I last posted here on Aug.10, 10.59 a.m. It is only today that I realize that
there is a page 2 on which this thread continues ! For several weeks I had been looking for a reply (while overlooking your reply on page 2) and had eventually given up on it thinking you were at your wits end. Today I feel like beating myself up - please accept my apology !
Now, I did everything you suggested, but the result is the same as with libgig :
a@a:~/Arbeitsfläche/LS/src/liblscp$ dpkg-buildpackage -rfakeroot -b
dpkg-buildpackage: Quellpaket liblscp
dpkg-buildpackage: Quellversion 0.5.7-1
dpkg-buildpackage: Quellen geändert durch Rui Nuno Capela <rncbc@users.sourceforge.net>
dpkg-buildpackage: Host-Architektur amd64
dpkg-source --before-build liblscp
fakeroot debian/rules clean
dh_testdir
dh_testroot
rm -f build-stamp
/usr/bin/make -f Makefile.svn || true
make[1]: Entering directory `/home/a/Arbeitsfläche/LS/src/liblscp'
/usr/share/aclocal/gtkglextmm-1.2.m4:225: warning: underquoted definition of AC_GTKGLEXTMM_SUPPORTS_MULTIHEAD
/usr/share/aclocal/gtkglextmm-1.2.m4:225: run info '(automake)Extending aclocal'
/usr/share/aclocal/gtkglextmm-1.2.m4:225: or see http://sources.redhat.com/automake/auto ... ng-aclocal
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `.m4'.
libtoolize: copying file `.m4/libtool.m4'
libtoolize: copying file `.m4/ltoptions.m4'
libtoolize: copying file `.m4/ltsugar.m4'
libtoolize: copying file `.m4/ltversion.m4'
libtoolize: copying file `.m4/lt~obsolete.m4'
automake: ####################
automake: ## Internal Error ##
automake: ####################
automake: Unknown key `HAVE-MAKEFILE-IN-DEPS' in `?HAVE-MAKEFILE-IN-DEPS?'
automake: Please contact <bug-automake@gnu.org>.
at /usr/share/automake-1.11/Automake/Channels.pm line 657
Automake::Channels::msg('automake', '', 'Unknown key `HAVE-MAKEFILE-IN-DEPS\' in `?HAVE-MAKEFILE-IN-DE...') called at /usr/share/automake-1.11/Automake/ChannelDefs.pm line 208
Automake::ChannelDefs::prog_error('Unknown key `HAVE-MAKEFILE-IN-DEPS\' in `?HAVE-MAKEFILE-IN-DE...') called at /usr/bin/automake line 6987
Automake::transform_token('?HAVE-MAKEFILE-IN-DEPS?', 'HASH(0x25feef8)', 'HAVE-MAKEFILE-IN-DEPS') called at /usr/bin/automake line 7025
Automake::transform('?HAVE-MAKEFILE-IN-DEPS?', 'HASH(0x25feef8)') called at /usr/bin/automake line 7097
Automake::make_paragraphs('/usr/share/automake-1.11/am/configure.am', 'AUTOMAKE-OPTIONS', '--gnu', 'VERBOSE', '', 'MAKEFILE-AM', '$(srcdir)/Makefile.am', 'MAKEFILE-IN', '$(srcdir)/Makefile.in', ...) called at /usr/bin/automake line 7170
Automake::file_contents_internal(1, '/usr/share/automake-1.11/am/configure.am', 'Automake::Location=HASH(0x27efac8)', 'VERBOSE', '', 'AUTOMAKE-OPTIONS', '--gnu', 'MAKEFILE-AM', '$(srcdir)/Makefile.am', ...) called at /usr/bin/automake line 7343
Automake::file_contents('configure', 'Automake::Location=HASH(0x27efac8)', 'MAKEFILE', 'Makefile', 'MAKEFILE-DEPS', '$(srcdir)/Makefile.in', 'CONFIG-MAKEFILE', '$(subdir)/$@', 'MAKEFILE-IN', ...) called at /usr/bin/automake line 4222
Automake::handle_configure('doc/Makefile.am', 'doc/Makefile.in', 'doc/Makefile', 'doc/Makefile.in') called at /usr/bin/automake line 8168
Automake::generate_makefile('doc/Makefile.am', 'doc/Makefile.in') called at /usr/bin/automake line 8533
Automake::handle_makefile('doc/Makefile.in') called at /usr/bin/automake line 8547
Automake::handle_makefiles_serial() called at /usr/bin/automake line 8700
make[1]: *** [configure] Fehler 255
make[1]: Leaving directory `/home/a/Arbeitsfläche/LS/src/liblscp'
chmod a+x ./configure
chmod: Zugriff auf „./configure“ nicht möglich: Datei oder Verzeichnis nicht gefunden
make: *** [clean] Fehler 1
dpkg-buildpackage: Fehler: Fehler-Exitstatus von fakeroot debian/rules clean war 2
a@a:~/Arbeitsfläche/LS/src/liblscp$
After the line 'chmod a+x ./configure' it reads : No access to ./configure : file not found
Again it looks like there is no file named 'configure' in what came in from svn :
a@a:~/Arbeitsfläche/LS/src/liblscp$ ls
aclocal.m4 config.sub examples lscp.pc.in NEWS win32
AUTHORS configure.ac INSTALL ltmain.sh osx
autom4te.cache COPYING install-sh Makefile.am README
ChangeLog debian liblscp.spec.in Makefile.svn src
config.guess doc lscp missing TODO
a@a:~/Arbeitsfläche/LS/src/liblscp$
Needless to say no debfile has been built :
a@a:~/Arbeitsfläche/LS/src/liblscp$ cd ..
a@a:~/Arbeitsfläche/LS/src$ ls
gigedit jlscp jsampler libgig liblscp linuxsampler qsampler
a@a:~/Arbeitsfläche/LS/src$
It all runs on a 64bit Debian-7
Thank you very much for your help, and, again, apologies !
I am still under fresh shock at discovering that you d i d reply
to what I last posted here on Aug.10, 10.59 a.m. It is only today that I realize that
there is a page 2 on which this thread continues ! For several weeks I had been looking for a reply (while overlooking your reply on page 2) and had eventually given up on it thinking you were at your wits end. Today I feel like beating myself up - please accept my apology !
Now, I did everything you suggested, but the result is the same as with libgig :
a@a:~/Arbeitsfläche/LS/src/liblscp$ dpkg-buildpackage -rfakeroot -b
dpkg-buildpackage: Quellpaket liblscp
dpkg-buildpackage: Quellversion 0.5.7-1
dpkg-buildpackage: Quellen geändert durch Rui Nuno Capela <rncbc@users.sourceforge.net>
dpkg-buildpackage: Host-Architektur amd64
dpkg-source --before-build liblscp
fakeroot debian/rules clean
dh_testdir
dh_testroot
rm -f build-stamp
/usr/bin/make -f Makefile.svn || true
make[1]: Entering directory `/home/a/Arbeitsfläche/LS/src/liblscp'
/usr/share/aclocal/gtkglextmm-1.2.m4:225: warning: underquoted definition of AC_GTKGLEXTMM_SUPPORTS_MULTIHEAD
/usr/share/aclocal/gtkglextmm-1.2.m4:225: run info '(automake)Extending aclocal'
/usr/share/aclocal/gtkglextmm-1.2.m4:225: or see http://sources.redhat.com/automake/auto ... ng-aclocal
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `.m4'.
libtoolize: copying file `.m4/libtool.m4'
libtoolize: copying file `.m4/ltoptions.m4'
libtoolize: copying file `.m4/ltsugar.m4'
libtoolize: copying file `.m4/ltversion.m4'
libtoolize: copying file `.m4/lt~obsolete.m4'
automake: ####################
automake: ## Internal Error ##
automake: ####################
automake: Unknown key `HAVE-MAKEFILE-IN-DEPS' in `?HAVE-MAKEFILE-IN-DEPS?'
automake: Please contact <bug-automake@gnu.org>.
at /usr/share/automake-1.11/Automake/Channels.pm line 657
Automake::Channels::msg('automake', '', 'Unknown key `HAVE-MAKEFILE-IN-DEPS\' in `?HAVE-MAKEFILE-IN-DE...') called at /usr/share/automake-1.11/Automake/ChannelDefs.pm line 208
Automake::ChannelDefs::prog_error('Unknown key `HAVE-MAKEFILE-IN-DEPS\' in `?HAVE-MAKEFILE-IN-DE...') called at /usr/bin/automake line 6987
Automake::transform_token('?HAVE-MAKEFILE-IN-DEPS?', 'HASH(0x25feef8)', 'HAVE-MAKEFILE-IN-DEPS') called at /usr/bin/automake line 7025
Automake::transform('?HAVE-MAKEFILE-IN-DEPS?', 'HASH(0x25feef8)') called at /usr/bin/automake line 7097
Automake::make_paragraphs('/usr/share/automake-1.11/am/configure.am', 'AUTOMAKE-OPTIONS', '--gnu', 'VERBOSE', '', 'MAKEFILE-AM', '$(srcdir)/Makefile.am', 'MAKEFILE-IN', '$(srcdir)/Makefile.in', ...) called at /usr/bin/automake line 7170
Automake::file_contents_internal(1, '/usr/share/automake-1.11/am/configure.am', 'Automake::Location=HASH(0x27efac8)', 'VERBOSE', '', 'AUTOMAKE-OPTIONS', '--gnu', 'MAKEFILE-AM', '$(srcdir)/Makefile.am', ...) called at /usr/bin/automake line 7343
Automake::file_contents('configure', 'Automake::Location=HASH(0x27efac8)', 'MAKEFILE', 'Makefile', 'MAKEFILE-DEPS', '$(srcdir)/Makefile.in', 'CONFIG-MAKEFILE', '$(subdir)/$@', 'MAKEFILE-IN', ...) called at /usr/bin/automake line 4222
Automake::handle_configure('doc/Makefile.am', 'doc/Makefile.in', 'doc/Makefile', 'doc/Makefile.in') called at /usr/bin/automake line 8168
Automake::generate_makefile('doc/Makefile.am', 'doc/Makefile.in') called at /usr/bin/automake line 8533
Automake::handle_makefile('doc/Makefile.in') called at /usr/bin/automake line 8547
Automake::handle_makefiles_serial() called at /usr/bin/automake line 8700
make[1]: *** [configure] Fehler 255
make[1]: Leaving directory `/home/a/Arbeitsfläche/LS/src/liblscp'
chmod a+x ./configure
chmod: Zugriff auf „./configure“ nicht möglich: Datei oder Verzeichnis nicht gefunden
make: *** [clean] Fehler 1
dpkg-buildpackage: Fehler: Fehler-Exitstatus von fakeroot debian/rules clean war 2
a@a:~/Arbeitsfläche/LS/src/liblscp$
After the line 'chmod a+x ./configure' it reads : No access to ./configure : file not found
Again it looks like there is no file named 'configure' in what came in from svn :
a@a:~/Arbeitsfläche/LS/src/liblscp$ ls
aclocal.m4 config.sub examples lscp.pc.in NEWS win32
AUTHORS configure.ac INSTALL ltmain.sh osx
autom4te.cache COPYING install-sh Makefile.am README
ChangeLog debian liblscp.spec.in Makefile.svn src
config.guess doc lscp missing TODO
a@a:~/Arbeitsfläche/LS/src/liblscp$
Needless to say no debfile has been built :
a@a:~/Arbeitsfläche/LS/src/liblscp$ cd ..
a@a:~/Arbeitsfläche/LS/src$ ls
gigedit jlscp jsampler libgig liblscp linuxsampler qsampler
a@a:~/Arbeitsfläche/LS/src$
It all runs on a 64bit Debian-7
Thank you very much for your help, and, again, apologies !
-
- User
- Posts: 61
- Joined: Fri Jan 03, 2014 5:59 pm
Re: cant compile libgig
Hi,
An other way is to go to the terminal to the main directory of liblscp.
In the text below edit "-march=athlon-fx -mtune=athlon-fx"
Copy and paste the text below to the terminal and [enter].
JanFlorijn
An other way is to go to the terminal to the main directory of liblscp.
In the text below edit "-march=athlon-fx -mtune=athlon-fx"
Copy and paste the text below to the terminal and [enter].
- cd liblscp
makefile -f Makefile.svn
chmod a+x configure
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="-O2 -march=athlon-fx -mtune=athlon-fx -ffast-math -mmmx -msse -funroll-loops -fomit-frame-pointer"
./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
make
sudo make install
cd ..
cd libgig
chmod a+x configure
makefile -f Makefile.cvs
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="-O2 -march=athlon-fx -mtune=athlon-fx -ffast-math -mmmx -msse -funroll-loops -fomit-frame-pointer"
./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
make
sudo make install
chmod a+x configure
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="-O2 -march=athlon-fx -mtune=athlon-fx -ffast-math -mmmx -msse -funroll-loops -fomit-frame-pointer"
./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
make
sudo make install
cd ..
cd linuxsampler
chmod a+x configure
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="-O2 -march=athlon-fx -mtune=athlon-fx -ffast-math -mmmx -msse -funroll-loops -fomit-frame-pointer"
./configure --libdir=/usr/lib --enable-preload-samples=0 --enable-plugin-dir=/usr/lib/linuxsampler/plugins --enable-asiosdk-dir=/usr/lib/ASIOSDK23 --enable-vstsdk-dir=/usr/lib/VST3SDK --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
make
sudo make install
cd ..
cd gigedit
chmod a+x configure
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="-O2 -march=athlon-fx -mtune=athlon-fx -ffast-math -mmmx -msse -funroll-loops -fomit-frame-pointer"
./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
make
sudo make install
JanFlorijn
Re: cant compile libgig
Thank you !
This is the result :
a@a:~/Arbeitsfläche/LS/src$ cd liblscp
a@a:~/Arbeitsfläche/LS/src/liblscp$ makefile -f Makefile.svn
bash: makefile: Kommando nicht gefunden.
a@a:~/Arbeitsfläche/LS/src/liblscp$ makefile -f Makefile.svn
bash: makefile: Kommando nicht gefunden.
a@a:~/Arbeitsfläche/LS/src/liblscp$ chmod a+x configure
chmod: Zugriff auf „configure“ nicht möglich: Datei oder Verzeichnis nicht gefunden
a@a:~/Arbeitsfläche/LS/src/liblscp$ CHOST="x86_64-pc-linux-gnu"
a@a:~/Arbeitsfläche/LS/src/liblscp$ CXXFLAGS="-O2 -march=athlon-fx -mtune=athlon-fx -ffast-math -mmmx -msse -funroll-loops -fomit-frame-pointer"
a@a:~/Arbeitsfläche/LS/src/liblscp$ ./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
bash: ./configure: Datei oder Verzeichnis nicht gefunden
a@a:~/Arbeitsfläche/LS/src/liblscp$ make
make: *** Keine Targets angegeben und keine »make«-Steuerdatei gefunden. Schluss.
a@a:~/Arbeitsfläche/LS/src/liblscp$ sudo make install
[sudo] password for a:
Sorry, try again.
[sudo] password for a:
make: *** No rule to make target 'install'. Schluss.
a@a:~/Arbeitsfläche/LS/src/liblscp$
note the third line which reads that a command 'makefile' could not be found. Is 'makefile' supposed to be a command ? It all
occured within the liblscp - folder, see the first line.
This is the result :
a@a:~/Arbeitsfläche/LS/src$ cd liblscp
a@a:~/Arbeitsfläche/LS/src/liblscp$ makefile -f Makefile.svn
bash: makefile: Kommando nicht gefunden.
a@a:~/Arbeitsfläche/LS/src/liblscp$ makefile -f Makefile.svn
bash: makefile: Kommando nicht gefunden.
a@a:~/Arbeitsfläche/LS/src/liblscp$ chmod a+x configure
chmod: Zugriff auf „configure“ nicht möglich: Datei oder Verzeichnis nicht gefunden
a@a:~/Arbeitsfläche/LS/src/liblscp$ CHOST="x86_64-pc-linux-gnu"
a@a:~/Arbeitsfläche/LS/src/liblscp$ CXXFLAGS="-O2 -march=athlon-fx -mtune=athlon-fx -ffast-math -mmmx -msse -funroll-loops -fomit-frame-pointer"
a@a:~/Arbeitsfläche/LS/src/liblscp$ ./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
bash: ./configure: Datei oder Verzeichnis nicht gefunden
a@a:~/Arbeitsfläche/LS/src/liblscp$ make
make: *** Keine Targets angegeben und keine »make«-Steuerdatei gefunden. Schluss.
a@a:~/Arbeitsfläche/LS/src/liblscp$ sudo make install
[sudo] password for a:
Sorry, try again.
[sudo] password for a:
make: *** No rule to make target 'install'. Schluss.
a@a:~/Arbeitsfläche/LS/src/liblscp$
note the third line which reads that a command 'makefile' could not be found. Is 'makefile' supposed to be a command ? It all
occured within the liblscp - folder, see the first line.
-
- User
- Posts: 61
- Joined: Fri Jan 03, 2014 5:59 pm
Re: cant compile libgig
Hi,
1. I think you are missing required programs. To be sure you get the complete commands. Very important are the lines 9-11, sudo apt get install. I suppose you miss something there, or it will not install.
2. Wich distribution of Linux do you use: Ubuntu, Ubuntu Studio, Linux Mint etc
3. When the code sub 1. does not work, execute the next from a terminalline by line:
4. I see you did not modify the brand and typy of your processor. See next code:
I have a AMD athlon FX 3200 6 core. What is the brand and type of your processor?
Kind regards,
JanFlorijn
1. I think you are missing required programs. To be sure you get the complete commands. Very important are the lines 9-11, sudo apt get install. I suppose you miss something there, or it will not install.
Code: Select all
sudo apt-get install subversion
cd /Arbeitsfläche/LS/src
svn co https://svn.linuxsampler.org/svn/libgig/trunk libgig
svn co https://svn.linuxsampler.org/svn/liblscp/trunk liblscp
svn co https://svn.linuxsampler.org/svn/linuxsampler/trunk linuxsampler
svn co https://svn.linuxsampler.org/svn/qsampler/trunk qsampler
svn co https://svn.linuxsampler.org/svn/jlscp/trunk jlscp
svn co https://svn.linuxsampler.org/svn/jsampler/trunk jsampler
svn co https://svn.linuxsampler.org/svn/gigedit/trunk gigedit
sudo apt-get install g++ debhelper pkg-config automake1.1 automake1.4 automake1.9 libtool fakeroot libsndfile1-dev doxygen uuid-dev bison
sudo apt-get install intltool libgtkmm-2.4-dev xsltproc flex sqlite 3.3
sudo apt-get install ant qt4-dev-tools libjack-jackd2-dev libx11-dev x11proto-core-dev docbook-xsl
cd /Arbeitsfläche/LS/src
cd liblscp
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="-march=athlon-fx -mtune=athlon-fx"
make -f Makefile.svn
chmod a+x configure
./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
make
sudo make install
cd ..
cd libgig
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="-march=athlon-fx -mtune=athlon-fx"
make -f Makefile.cvs
chmod a+x configure
./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
make
sudo make install
cd ..
cd linuxsampler
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="-march=athlon-fx -mtune=athlon-fx"
make -f Makefile.cvs
chmod a+x configure
./configure --libdir=/usr/lib --enable-plugin-dir=/usr/lib/linuxsampler/plugins --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
make
sudo make install
cd ..
cd gigedit
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="-march=athlon-fx -mtune=athlon-fx"
chmod a+x configure
make -f Makefile.cvs
./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
make
sudo make install
3. When the code sub 1. does not work, execute the next from a terminalline by line:
Code: Select all
sudo apt-get install g++
sudo apt-get install debhelper
sudo apt-get install pkg-config
sudo apt-get install automake1.1
sudo apt-get install automake1.4
sudo apt-get install automake1.9
sudo apt-get install libtool
sudo apt-get install fakeroot
sudo apt-get install libsndfile1-dev
sudo apt-get install doxygen
sudo apt-get install uuid-dev
sudo apt-get install bison
sudo apt-get install intltool
sudo apt-get install libgtkmm-2.4-dev
sudo apt-get install xsltproc
sudo apt-get install flex
sudo apt-get install sqlite 3.3
sudo apt-get install sudo apt-get install ant
sudo apt-get install qt4-dev-tools
sudo apt-get install libjack-jackd2-dev
sudo apt-get install libx11-dev
sudo apt-get install x11proto-core-dev
sudo apt-get install docbook-xsl
I have a AMD athlon FX 3200 6 core. What is the brand and type of your processor?
Code: Select all
CXXFLAGS="-march=athlon-fx -mtune=athlon-fx"
JanFlorijn
Re: cant compile libgig
Thank you !
I have everything accomplished, line by line. It looks like every required package was
already on board.
See, for example, the output for docbook-xsl :
a@a:~/Arbeitsfläche/LS/src$ sudo apt-get install docbook-xsl
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
docbook-xsl ist schon die neueste Version.
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
cheese gnome-video-effects sound-juicer
Verwenden Sie »apt-get autoremove«, um sie zu entfernen.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
a@a:~/Arbeitsfläche/LS/src$
Is it a matter of importance that, whith every package, a hint was given saying :
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
cheese gnome-video-effects sound-juicer
Verwenden Sie »apt-get autoremove«, um sie zu entfernen.
meaning, that the packages mentioned above ( cheese gnome-video-effects sound-juicer) had been
installed automatically and were not required any more and that 'apt-get autoremove' was suggested
to remove them ?
My system ist a 64-bit Debian 7. My processor is an Intel Core i3 CPU 530 @ 2,93 GHz x 4.
I have everything accomplished, line by line. It looks like every required package was
already on board.
See, for example, the output for docbook-xsl :
a@a:~/Arbeitsfläche/LS/src$ sudo apt-get install docbook-xsl
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
docbook-xsl ist schon die neueste Version.
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
cheese gnome-video-effects sound-juicer
Verwenden Sie »apt-get autoremove«, um sie zu entfernen.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
a@a:~/Arbeitsfläche/LS/src$
Is it a matter of importance that, whith every package, a hint was given saying :
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
cheese gnome-video-effects sound-juicer
Verwenden Sie »apt-get autoremove«, um sie zu entfernen.
meaning, that the packages mentioned above ( cheese gnome-video-effects sound-juicer) had been
installed automatically and were not required any more and that 'apt-get autoremove' was suggested
to remove them ?
My system ist a 64-bit Debian 7. My processor is an Intel Core i3 CPU 530 @ 2,93 GHz x 4.
Re: cant compile libgig
I then went into the libgig-directory and applied the fakeroot-buildpackage command again,
but the result is all the same :
make[1]: *** [configure] Fehler 255
make[1]: Leaving directory `/home/a/Arbeitsfläche/LS/src/libgig'
chmod a+x configure
chmod: Zugriff auf „configure“ nicht möglich: Datei oder Verzeichnis nicht gefunden
make: *** [clean] Fehler 1
dpkg-buildpackage: Fehler: Fehler-Exitstatus von fakeroot debian/rules clean war 2
a@a:~/Arbeitsfläche/LS/src/libgig$
but the result is all the same :
make[1]: *** [configure] Fehler 255
make[1]: Leaving directory `/home/a/Arbeitsfläche/LS/src/libgig'
chmod a+x configure
chmod: Zugriff auf „configure“ nicht möglich: Datei oder Verzeichnis nicht gefunden
make: *** [clean] Fehler 1
dpkg-buildpackage: Fehler: Fehler-Exitstatus von fakeroot debian/rules clean war 2
a@a:~/Arbeitsfläche/LS/src/libgig$
-
- User
- Posts: 61
- Joined: Fri Jan 03, 2014 5:59 pm
Re: cant compile libgig
Hi,
So the lines 9,10 and 11 are not the problem. I think the location of your source is the problem. Also cd ... is changed. Regarding the processor I post a reply later, because now i am in Windows.
I work with Ubuntu studio and that works fine. But, most people choose a distribution with a specially reason.
Kind regards,
JanFlorijn
So the lines 9,10 and 11 are not the problem. I think the location of your source is the problem. Also cd ... is changed. Regarding the processor I post a reply later, because now i am in Windows.
I work with Ubuntu studio and that works fine. But, most people choose a distribution with a specially reason.
Code: Select all
sudo apt-get install subversion
cd /home/a/Arbeitsfläche/LS/src
svn co https://svn.linuxsampler.org/svn/libgig/trunk libgig
svn co https://svn.linuxsampler.org/svn/liblscp/trunk liblscp
svn co https://svn.linuxsampler.org/svn/linuxsampler/trunk linuxsampler
svn co https://svn.linuxsampler.org/svn/qsampler/trunk qsampler
svn co https://svn.linuxsampler.org/svn/jlscp/trunk jlscp
svn co https://svn.linuxsampler.org/svn/jsampler/trunk jsampler
svn co https://svn.linuxsampler.org/svn/gigedit/trunk gigedit
cd /home/a/Arbeitsfläche/LS/src
cd liblscp
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="-march=athlon-fx -mtune=athlon-fx"
make -f Makefile.svn
chmod a+x configure
./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
make
sudo make install
cd ..
cd libgig
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="-march=athlon-fx -mtune=athlon-fx"
make -f Makefile.cvs
chmod a+x configure
./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
make
sudo make install
cd ..
cd linuxsampler
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="-march=athlon-fx -mtune=athlon-fx"
make -f Makefile.cvs
chmod a+x configure
./configure --libdir=/usr/lib --enable-plugin-dir=/usr/lib/linuxsampler/plugins --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
make
sudo make install
cd ..
cd gigedit
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="-march=athlon-fx -mtune=athlon-fx"
chmod a+x configure
make -f Makefile.cvs
./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
make
sudo make install
JanFlorijn
Re: cant compile libgig
Thank you !
In the liblscp-directory, on typing 'make -f Makefile.svn' the output reads as follows :
a@a:~/Arbeitsfläche/LS/src/liblscp$ make -f Makefile.svn
/usr/share/aclocal/gtkglextmm-1.2.m4:225: warning: underquoted definition of AC_GTKGLEXTMM_SUPPORTS_MULTIHEAD
/usr/share/aclocal/gtkglextmm-1.2.m4:225: run info '(automake)Extending aclocal'
/usr/share/aclocal/gtkglextmm-1.2.m4:225: or see http://sources.redhat.com/automake/auto ... ng-aclocal
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `.m4'.
libtoolize: copying file `.m4/libtool.m4'
libtoolize: copying file `.m4/ltoptions.m4'
libtoolize: copying file `.m4/ltsugar.m4'
libtoolize: copying file `.m4/ltversion.m4'
libtoolize: copying file `.m4/lt~obsolete.m4'
configure.ac:30: installing `./config.guess'
configure.ac:30: installing `./config.sub'
configure.ac:6: installing `./install-sh'
configure.ac:6: installing `./missing'
automake: ####################
automake: ## Internal Error ##
automake: ####################
automake: Unknown key `HAVE-MAKEFILE-IN-DEPS' in `?HAVE-MAKEFILE-IN-DEPS?'
automake: Please contact <bug-automake@gnu.org>.
at /usr/share/automake-1.11/Automake/Channels.pm line 657
Automake::Channels::msg('automake', '', 'Unknown key `HAVE-MAKEFILE-IN-DEPS\' in `?HAVE-MAKEFILE-IN-DE...') called at /usr/share/automake-1.11/Automake/ChannelDefs.pm line 208
Automake::ChannelDefs::prog_error('Unknown key `HAVE-MAKEFILE-IN-DEPS\' in `?HAVE-MAKEFILE-IN-DE...') called at /usr/bin/automake line 6987
Automake::transform_token('?HAVE-MAKEFILE-IN-DEPS?', 'HASH(0x22025d0)', 'HAVE-MAKEFILE-IN-DEPS') called at /usr/bin/automake line 7025
Automake::transform('?HAVE-MAKEFILE-IN-DEPS?', 'HASH(0x22025d0)') called at /usr/bin/automake line 7097
Automake::make_paragraphs('/usr/share/automake-1.11/am/configure.am', 'AUTOMAKE-OPTIONS', '--gnu', 'VERBOSE', '', 'MAKEFILE-AM', '$(srcdir)/Makefile.am', 'MAKEFILE-IN', '$(srcdir)/Makefile.in', ...) called at /usr/bin/automake line 7170
Automake::file_contents_internal(1, '/usr/share/automake-1.11/am/configure.am', 'Automake::Location=HASH(0x23f6210)', 'VERBOSE', '', 'AUTOMAKE-OPTIONS', '--gnu', 'MAKEFILE-AM', '$(srcdir)/Makefile.am', ...) called at /usr/bin/automake line 7343
Automake::file_contents('configure', 'Automake::Location=HASH(0x23f6210)', 'MAKEFILE', 'Makefile', 'MAKEFILE-DEPS', '$(srcdir)/Makefile.in', 'CONFIG-MAKEFILE', '$(subdir)/$@', 'MAKEFILE-IN', ...) called at /usr/bin/automake line 4222
Automake::handle_configure('doc/Makefile.am', 'doc/Makefile.in', 'doc/Makefile', 'doc/Makefile.in') called at /usr/bin/automake line 8168
Automake::generate_makefile('doc/Makefile.am', 'doc/Makefile.in') called at /usr/bin/automake line 8533
Automake::handle_makefile('doc/Makefile.in') called at /usr/bin/automake line 8547
Automake::handle_makefiles_serial() called at /usr/bin/automake line 8700
Makefile.svn:4: recipe for target 'configure' failed
make: *** [configure] Error 255
a@a:~/Arbeitsfläche/LS/src/liblscp$
In the liblscp-directory, on typing 'make -f Makefile.svn' the output reads as follows :
a@a:~/Arbeitsfläche/LS/src/liblscp$ make -f Makefile.svn
/usr/share/aclocal/gtkglextmm-1.2.m4:225: warning: underquoted definition of AC_GTKGLEXTMM_SUPPORTS_MULTIHEAD
/usr/share/aclocal/gtkglextmm-1.2.m4:225: run info '(automake)Extending aclocal'
/usr/share/aclocal/gtkglextmm-1.2.m4:225: or see http://sources.redhat.com/automake/auto ... ng-aclocal
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `.m4'.
libtoolize: copying file `.m4/libtool.m4'
libtoolize: copying file `.m4/ltoptions.m4'
libtoolize: copying file `.m4/ltsugar.m4'
libtoolize: copying file `.m4/ltversion.m4'
libtoolize: copying file `.m4/lt~obsolete.m4'
configure.ac:30: installing `./config.guess'
configure.ac:30: installing `./config.sub'
configure.ac:6: installing `./install-sh'
configure.ac:6: installing `./missing'
automake: ####################
automake: ## Internal Error ##
automake: ####################
automake: Unknown key `HAVE-MAKEFILE-IN-DEPS' in `?HAVE-MAKEFILE-IN-DEPS?'
automake: Please contact <bug-automake@gnu.org>.
at /usr/share/automake-1.11/Automake/Channels.pm line 657
Automake::Channels::msg('automake', '', 'Unknown key `HAVE-MAKEFILE-IN-DEPS\' in `?HAVE-MAKEFILE-IN-DE...') called at /usr/share/automake-1.11/Automake/ChannelDefs.pm line 208
Automake::ChannelDefs::prog_error('Unknown key `HAVE-MAKEFILE-IN-DEPS\' in `?HAVE-MAKEFILE-IN-DE...') called at /usr/bin/automake line 6987
Automake::transform_token('?HAVE-MAKEFILE-IN-DEPS?', 'HASH(0x22025d0)', 'HAVE-MAKEFILE-IN-DEPS') called at /usr/bin/automake line 7025
Automake::transform('?HAVE-MAKEFILE-IN-DEPS?', 'HASH(0x22025d0)') called at /usr/bin/automake line 7097
Automake::make_paragraphs('/usr/share/automake-1.11/am/configure.am', 'AUTOMAKE-OPTIONS', '--gnu', 'VERBOSE', '', 'MAKEFILE-AM', '$(srcdir)/Makefile.am', 'MAKEFILE-IN', '$(srcdir)/Makefile.in', ...) called at /usr/bin/automake line 7170
Automake::file_contents_internal(1, '/usr/share/automake-1.11/am/configure.am', 'Automake::Location=HASH(0x23f6210)', 'VERBOSE', '', 'AUTOMAKE-OPTIONS', '--gnu', 'MAKEFILE-AM', '$(srcdir)/Makefile.am', ...) called at /usr/bin/automake line 7343
Automake::file_contents('configure', 'Automake::Location=HASH(0x23f6210)', 'MAKEFILE', 'Makefile', 'MAKEFILE-DEPS', '$(srcdir)/Makefile.in', 'CONFIG-MAKEFILE', '$(subdir)/$@', 'MAKEFILE-IN', ...) called at /usr/bin/automake line 4222
Automake::handle_configure('doc/Makefile.am', 'doc/Makefile.in', 'doc/Makefile', 'doc/Makefile.in') called at /usr/bin/automake line 8168
Automake::generate_makefile('doc/Makefile.am', 'doc/Makefile.in') called at /usr/bin/automake line 8533
Automake::handle_makefile('doc/Makefile.in') called at /usr/bin/automake line 8547
Automake::handle_makefiles_serial() called at /usr/bin/automake line 8700
Makefile.svn:4: recipe for target 'configure' failed
make: *** [configure] Error 255
a@a:~/Arbeitsfläche/LS/src/liblscp$